It sounds like you're looking for the Replacement #20 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems # MR79UR.
These replacement blocks will work with the LRE4000 Series suspension systems for trailers with axle ratings between 6,501 lbs and 7,500 lbs, and RS Series suspension systems for trailers with axle ratings between 12,001 lbs and 15,000 lbs. view full answer...
We do have the replacement Spur Gear for Lippert In-Wall Slide-Outs - 16-Tooth # LC58VR that you need. We also have the Lippert Replacement Standard Bearing Block Kit for RV In-Wall Slide-Out # LC379060 should you end up needing the bearing blocks as well. Unfortunately we do not have just the plastic caps (shoes) for the bearing blocks. view full answer...
We've got you covered!
Looks like you're needing the Replacement Specialty In-Wall Block for Lippert Power Gear Slim Rack RV Slide-Out System - Right # LC87WD. view full answer...
You are correct that you will need a whole new "fuse block". The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger # PD4045KA will work for this purpose.
The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger # PD4045KA needs cut out dimensions of 10-3/4" long x 7-1/4" tall for installation. If this will not fit for your needs, please provide me with some more information on what you are needing and I would be happy to help you further. view full answer...
We do have motors that you can add to your landing gear. For example, the Landing Gear Set # RVLG-8000 can be operated with the manual crank # RVLG-HDL but you can also add the motor # LC142178 and switch # LG-145236 for effortless operation on your end.
The next upgrade for landing gear is the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. This is rated for up to 12,000 lbs and operates via separate motors so you can easily level your 5th wheel trailer without using blocks... view full answer...
Yes, the Replacement Auto Level Control Panel for Lippert Ground Control Leveling System part # LC421484 will work on the Lippert Ground Control 3.0 Electric 5th Wheel RV 6-Point Leveling System part # LC675817. It will also work on the Lippert Ground Control 3.0 Electric 5th Wheel RV 4-Point Leveling System part # LC358590 and the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System part # LC672136. view full answer...
The correct replacement circuit and control board for your Lippert Electronic leveling system is the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System # LC421484. This will be a plug and play solution, so it's easy to install and will not require any type of programming. view full answer...
Yes, the Stromberg Carlson RV Exterior Ladder w/ Hinges, # LA-401BA will work as a replacement ladder for your 2019 Thor Freedom Elite provided all fasteners are properly mounted to the RV's blocking or subframe on roof. The legs of this ladder can be trimmed as needed to provide for a custom fit.
Please note the linked product review and installation video. view full answer...
I looked up pictures of the back of your 2004 Alumascape and it has a square back that the Stromberg Ladder part # LA-401 would fit and work well on.
The legs of the ladder can be trimmed for length with a hacksaw or tube cutter. When you are installing mounting brackets and support pegs, make certain that all screws are fastened to the RV's blocking or subframe on roof. If you are uncertain if your RV has backing installed, you should contact your RV manufacture to confirm. It is unsafe... view full answer...
Yes, the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System # LC421484 is the correct replacement control panel for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System (6-point) # LC675817. view full answer...
Sounds like the replacement spring part # LC359434 is what you'd need but you can verify this by comparing your jack to the picture I attached. If the spring you need to replace looks like what's in the attached picture this is the correct replacement. view full answer...
We can help you with new hardware so that you can re-install the Class I hitch # 24677.
Please note that hitch hardware can be used only once. If it has been used previously to install the hitch on another vehicle then you must use all new hardware. This is easy to get since we have complete hardware kits for all hitches we sell.
You want to order # RHK. Once you are on that item's page simply enter the part number (24677)and brand (Draw-Tite) in the appropriate fields near the Add to... view full answer...
The correct replacement control panel for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 4-Point Set # LC358590 you were looking at is the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System # LC421484.
I included a video for both of the products mentioned for you to take a look at. view full answer...
Here is a list of all the Lippert Level Up replacement jacks we offer. Currently this is the only way Lippert offers their jacks and they do not offer a rebuild kit for these.
Replacement Lippert Level Up Hydraulic Jack - Silver - 8,000 lbs - 15" Travel # LC46ED
Replacement Hydraulic Jack Assembly for Lippert Level Up RV Leveling System - Lead Leg - 14,000 lbs # LC83ED
Replacement Hydraulic Jack Assembly for Lippert Level Up RV Leveling System - Follow Leg - 14,000 lb # LC23ED
Replacement... view full answer...
Unfortunately having your RV information, 2021 Winnebago Micro Minnie doesn't tell me the correct slide out that you have. If you have Lippert in-wall slide-outs, then we have the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs # LC26VR for the float side.
The # LC26VR includes:
- 1 Upper slide rack
- 1 Lower slide rack
- 2 Rack-end pugs
- 2 Rivets
- 2 Rollers
- 2 Snap rings
- 6 Wear plugs
There is also the Lippert Replacement Standard Bearing Block Kit #... view full answer...
For your 2004 Itasca Sonova you'll want the Replacement Touchpad Control Panel for Kwikee Level Best Hydraulic RV Leveling System for Winnebago # LC77CJ. view full answer...
I have good news for you, the Lippert # LC177094 Replacement Cartridge Valve you'd looked at is indeed the correct replacement for your Level Up system. view full answer...
The Lippert Replacement Power Gear Control Board for Kwikee Level Best Hydraulic Leveling System part # LC359289 will take care of the control board.
I would start here. Generally this is what has failed. To verify look for a hot spot or a flash point on one of the control board circuits. There is not a replacement touch pad available anywhere that I can find new. This may have to be sourced used.
I do not have parts that would mix and match and make it work but do have a full replacement... view full answer...
Yes, you can replace the control panel for the leveling system on your 2015 Bighorn 5th wheel. The Replacement Control Panel for Lippert Ground Control 3.0 # LC421484 is the correct replacement control panel for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC675817.
If you have a system other than the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC675817 on your Bighorn, please let me know what system you have and I would be happy to help... view full answer...
The Replacement 5-Function Remote Receiver with Replaceable Fuses # LC305117 will most likely be located close to the control panel for your leveling system, but it can be located elsewhere and still be wired correctly. The manufacturer does not specify a location. The best way to find it is to follow your trailer battery wires because every RV is different. view full answer...